Renamed "*acs*" files to "*dsm*".

iocs/dsmIOC/configure/CONFIG

@@ -0,0 +1,29 @@
+# CONFIG - Load build configuration data
+#
+# Do not make changes to this file!
+
+# Allow user to override where the build rules come from
+RULES = $(EPICS_BASE)
+
+# RELEASE files point to other application tops
+include $(TOP)/configure/RELEASE
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+-include $(TOP)/configure/RELEASE.Common.$(T_A)
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+
+CONFIG = $(RULES)/configure
+include $(CONFIG)/CONFIG
+
+# Override the Base definition:
+INSTALL_LOCATION = $(TOP)
+
+# CONFIG_SITE files contain other build configuration settings
+include $(TOP)/configure/CONFIG_SITE
+-include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+ -include $(TOP)/configure/CONFIG_SITE.Common.$(T_A)
+ -include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+

iocs/dsmIOC/configure/CONFIG_SITE

@@ -0,0 +1,44 @@
+# CONFIG_SITE
+
+# Make any application-specific changes to the EPICS build
+#   configuration variables in this file.
+#
+# Host/target specific settings can be specified in files named
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+#   CONFIG_SITE.Common.$(T_A)
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+
+# CHECK_RELEASE controls the consistency checking of the support
+#   applications pointed to by the RELEASE* files.
+# Normally CHECK_RELEASE should be set to YES.
+# Set CHECK_RELEASE to NO to disable checking completely.
+# Set CHECK_RELEASE to WARN to perform consistency checking but
+#   continue building even if conflicts are found.
+CHECK_RELEASE = YES
+
+# Set this when you only want to compile this application
+#   for a subset of the cross-compiled target architectures
+#   that Base is built for.
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-ppc32
+
+# To install files into a location other than $(TOP) define
+#   INSTALL_LOCATION here.
+#INSTALL_LOCATION=</absolute/path/to/install/top>
+
+# Set this when the IOC and build host use different paths
+#   to the install location. This may be needed to boot from
+#   a Microsoft FTP server say, or on some NFS configurations.
+#IOCS_APPL_TOP = </IOC's/absolute/path/to/install/top>
+
+# For application debugging purposes, override the HOST_OPT and/
+#   or CROSS_OPT settings from base/configure/CONFIG_SITE
+#HOST_OPT = NO
+#CROSS_OPT = NO
+
+# Include motor's CONFIG_SITE.local when building inside motor
+-include $(TOP)/../../../../configure/CONFIG_SITE.local
+# Include motorAcs's CONFIG_SITE.local when building inside motorAcs
+-include $(TOP)/../../configure/CONFIG_SITE.local
+# Use acsIOC's CONFIG_SITE.local
+-include $(TOP)/configure/CONFIG_SITE.local
+

iocs/dsmIOC/configure/EXAMPLE_CONFIG_SITE.local

@@ -0,0 +1,6 @@
+# Use settings from motor's CONFIG_SITE unless they are overridden below
+-include $(MOTOR)/configure/CONFIG_SITE
+
+#
+CHECK_RELEASE = WARN
+

iocs/dsmIOC/configure/EXAMPLE_RELEASE.local

@@ -0,0 +1,6 @@
+# Use the following lines if motorAcs was built inside motor
+MOTOR=
+-include $(MOTOR)/configure/RELEASE
+# Use the following lines if motorAcs was built outside motor
+#!MOTOR_ACS=
+#!-include $(MOTOR_ACS)/configure/RELEASE.local

iocs/dsmIOC/configure/Makefile

@@ -0,0 +1,8 @@
+TOP=..
+
+include $(TOP)/configure/CONFIG
+
+TARGETS = $(CONFIG_TARGETS)
+CONFIGS += $(subst ../,,$(wildcard $(CONFIG_INSTALLS)))
+
+include $(TOP)/configure/RULES

iocs/dsmIOC/configure/RELEASE

@@ -0,0 +1,8 @@
+# RELEASE - Location of external support modules
+
+# Use motor/module's generated release file when buidling inside motor
+-include $(TOP)/../../../RELEASE.$(EPICS_HOST_ARCH).local
+# Use motorAcs's release file when building inside motorAcs, but outside motor
+-include $(TOP)/../../configure/RELEASE.local
+# Use acsIOC's RELEASE.local when building outside motorAcs
+-include $(TOP)/configure/RELEASE.local

iocs/dsmIOC/configure/RULES

@@ -0,0 +1,6 @@
+# RULES
+
+include $(CONFIG)/RULES
+
+# Library should be rebuilt because LIBOBJS may have changed.
+$(LIBNAME): ../Makefile

iocs/dsmIOC/configure/RULES.ioc

@@ -0,0 +1,2 @@
+#RULES.ioc
+include $(CONFIG)/RULES.ioc

iocs/dsmIOC/configure/RULES_DIRS

@@ -0,0 +1,2 @@
+#RULES_DIRS
+include $(CONFIG)/RULES_DIRS

iocs/dsmIOC/configure/RULES_TOP

@@ -0,0 +1,3 @@
+#RULES_TOP
+include $(CONFIG)/RULES_TOP
+