diff --git a/README.md b/README.md
index e2fe4be..4d62821 100644
--- a/README.md
+++ b/README.md
@@ -99,28 +99,7 @@ In ``motorDSM/iocs/dsmIOC/configure``, copy ``EXAMPLE_RELEASE.local`` to ``RELEA
 
 
 -------------------------------------------------
-Running an example IOC
--------------------------------------------------
-
-To run the example IOC, build the packages listed below, then:  
-
-1. Follow the steps in "Configuring the system for attached controllers" below.
-
-2. Set the "EPICS_CA_ADDR_LIST" environment variable to include the IP address of the server.
-If it's running on the same computer, you can use the loopback IP address.  
-`$ export EPICS_CA_ADDR_LIST='127.0.0.1'`  
-
-3. In the ``iocs/dsmIOC/iocBoot/iocDsm`` directory, run  
-`$ ../../bin/linux-x86_64/dsm st.cmd.md90`  
-for one attached MD-90 controller, or  
-`$ ../../bin/linux-x86_64/dsm st.cmd.md90.multi`  
-for eight attached MD-90 controllers. Edit this file to use more than one unit; simply comment out the ones you don't need.  
-
-4. Test using the `caget` and `caput` arguments as described in the "Example usage" section below.
-
-
--------------------------------------------------
-Configuring the system for attached controllers
+Configuring the IOC server
 -------------------------------------------------
 
 The following steps must be used in either st.cmd.md90 (for a single unit) or in st.cmd.md90.multiple (for multiple units).
@@ -179,6 +158,27 @@ Note that, despite this field being called "Port", they use the names of the MD9
 Do __not__ use the direct serial port names (by default, serial0, serial1, etc.).  
 
 
+-------------------------------------------------
+Running the example IOC
+-------------------------------------------------
+
+To run the example IOC, build the packages listed below, then:  
+
+1. Follow the steps in "Configuring the system for attached controllers" below.
+
+2. Set the "EPICS_CA_ADDR_LIST" environment variable to include the IP address of the server.
+If it's running on the same computer, you can use the loopback IP address.  
+`$ export EPICS_CA_ADDR_LIST='127.0.0.1'`  
+
+3. In the ``iocs/dsmIOC/iocBoot/iocDsm`` directory, run  
+`$ ../../bin/linux-x86_64/dsm st.cmd.md90`  
+for one attached MD-90 controller, or  
+`$ ../../bin/linux-x86_64/dsm st.cmd.md90.multi`  
+for eight attached MD-90 controllers. Edit this file to use more than one unit; simply comment out the ones you don't need.  
+
+4. Test using the `caget` and `caput` arguments as described in the "Example usage" section below.
+
+
 -------------------------------------------------
 Example usage
 -------------------------------------------------